Psion OMNII Instrukcja Użytkownika Pobierz pdf (Strona 277)

Psion Teklogix Omnii XT10 Hand-Held Computer User Manual C-37

Appendix C: Bar Code Settings

Decoded (Intermec ISCP)

Discrete 2 of 5

Minimum Length

Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to

the number of characters (i.e., human readable characters), including check digit(s).

Length Restriction

Refer to “Length Restriction” on page C-14 for details.

Add/Remove Data

Refer to “Add/Remove Data” on page C-14 for details.

C.3.16 Discrete 2 of 5

Enabled

Set this parameter to on to enable “Discrete 2 of 5”.

Standard 2 of 5 Format

This parameter allows you to choose a standard format—either Identicon (6 start/stop bars)

or Computer Identics (4 start/stop bars).

Check Digit Verification

The available options for this parameter are Disabled and MOD 10 Check. “Check Digit

Verification” uses the specified algorithm of the option you've chosen to ensure the integrity

of the symbol data before transmitting. If the data does not contain that algorithm, the data is

not transmitted.

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

Set Length L1, Set Length L2, and Set Length L3

Lengths for “Discrete 2 of 5” can be set from 0 to 255. The length of a code refers to the

number of characters (i.e., human readable characters), including check digit(s).

Double-tapping on these parameters displays dialog boxes where you can define the code

length that will be recognized by your scanner.

Length Mode

You can chose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.

1 2 ... 272 273 274 275 276 277 278 279 280 281 282 ... 357 358

Brak uwag

Psion OMNII Instrukcja Użytkownika Strona 277