Psion EP10 Instrukcja Użytkownika Pobierz pdf (Strona 100)

Chapter 5: Programs

Internet Sharing

Psion EP10 Hand-Held Computer User Manual

5.18 Internet Sharing

This option allows you to use your EP10 to connect your PC to the Internet. Before you can use Internet

Sharing, you must make certain that you have established a data connection on your EP10.

5.18.1 Creating an Internet Connection

Follow the steps in this section only if you have not already setup an Internet connection.

You’ll need the following information before you begin:

From your cellular service provider: data connectivity information, access point name and PAP/CHAP secu-

rity settings.

From your Internet service provider (ISP) or wireless service provider: access point name and password and

any additional security information.

For a GPRS, 1xRTT or dialup connection:

•Tap on Start>Settings>Connections. Tap on the Connections icon.

•Under My Work Network, tap Add a new modem connection.

•Type a name for the connection, and choose Cellular Line (GPRS), or for 1xRTT connections, choose

Cellular Line. Tap on Next.

• Type the phone number or access point name provided by your service provider, and tap Next.

• Type the credentials supplied by your service provider, and tap Finish.

5.18.2 Using Internet Sharing

• On your PC, open the ActiveSync window, and tap on File>Connection Settings. If you are using

Windows Mobile Device Center, tap on Mobile Device Settings>Connection Settings.

• Disable Allow USB connection by tapping in the checkbox to the left of this option.

• Connect the EP10 to your PC using Bluetooth or a USB cable.

•On your EP10, tap Start>Internet Sharing.

• Choose the PC Connection type – USB or Bluetooth.

• Choose the network connection that the EP10 should use to connect to the Internet.

•Tap Connect. It takes approximately 30 seconds to establish a connection. (If you are prompted to turn

on Bluetooth, tap Ye s.)

For PC Running Windows XP or Earlier

If you are using a Bluetooth connection, execute the following steps on your PC:

•Tap Start>Control Panel>Network Connections.

• Right-click on Bluetooth Network Connections, and click on Bluetooth Network Devices.

• If the EP10 is listed as a Network Access Point, choose Connect. If it is not listed, choose Create a new

connection and use the New Connection Wizard to add the EP10 to the list.

For PC Running Windows Vista or Windows 7

If you are using a Bluetooth connection, execute the following steps on your PC:

•Tap Start>Control Panel>Network & Sharing Center.

• Double-tap on Set up a new connection or network.

•In the Choose a connection option screen, double-click on Connect to a Bluetooth personal area

network (PAN).

A Devices and Printers screen is displayed.

Note: Make certain that your data connection is running, and that you can access the Internet from the

EP10. If you are using a USB cable to connect to your PC, you will need to disable the ActiveSync

USB connection.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 265 266

Komentarze do niniejszej Instrukcji

Brak uwag

Psion EP10 Instrukcja Użytkownika Strona 100

Komentarze do niniejszej Instrukcji